The 24 inch electric hedge trimmer is used as an everyday gardening tool, and then its blades are sharp and firm to help the workers get the gardening done quickly. Blades have a limited service life, and regular disassembly, sanding, assembly, and maintenance of the 24 inch electric hedge trimmer can keep the 24 inch electric hedge trimmer in operation. The following small series will introduce the whole process of disassembly, polishing, assembly and maintenance of the blade in detail.

1. Remove the blade

Make sure the 24-inch electric hedge trimmer is turned off and disconnected from the power supply. Then, turn the machine upside down for easier access to the blade part. Usually, there is a screw near the blade that holds the blade in place. Using an appropriate screwdriver, loosen the screw counterclockwise and carefully remove the blade. During the disassembly process, care should be taken to prevent the blade from accidentally slipping, so as not to cause injury.

2. Blade grinding

The removed blade may be worn or passivated due to prolonged use. In order to ensure the sharpness of the blade and the effect of cutting grass, it is necessary to sand.

Use a professional knife sharpener to follow the serrated shape of the blade. Ensure uniform application of force during sanding to prevent distortion of the 24-inch electric hedge trimmer blade. After polishing, rinse the blade with water to make it clean.

The 24 inch electric hedge trimmer blade is removed, polished, assembled, and maintained

3. Assemble the new blade

Choose the right new blade and make sure it is compatible with the machine. Before installing a new blade, check the mounting holes in the base of the machine to ensure that there are no foreign objects.

Insert the new blade into the hole and make sure it fits perfectly into the machine base. Then, tighten the screw counterclockwise with a screwdriver to tighten the blade. When tightening the screws, pay attention to even force to ensure that the blade is firmly fixed.

4. Maintenance of 24-inch electric hedge trimmer

After the removal, sanding and assembly of the 24 inch electric hedge trimmer blade is complete, the 24 inch electric hedge trimmer needs to be fully serviced to ensure long-term stable operation of the machine.

First, clean the surface of the 24 inch electric hedge trimmer of weeds, dust and grease, and make sure the machine is well ventilated.

Second, check the power cord, plug, and switch of the 24-inch electric hedge trimmer to make sure it is intact.

In addition, key parts of the 24-inch electric hedge trimmer, such as bearings and transmission chains, are lubricated to reduce wear and friction and increase machine efficiency.

This is how to remove, sand, assemble and maintain a 24-inch electric hedge trimmer blade. I believe that after reading the removal, grinding, assembly and maintenance of the blade have an in-depth understanding. When using a 24 inch electric hedge trimmer, you should always pay attention to the wear level of the blade. If the blade becomes dull, you should sharpen it promptly. If the blade cannot be sharpened, you need to replace it promptly in order to provide better support for gardening.

24 inch electric hedge trimmer https://www.keylead.cn/What-is-a-24-inch-electric-hedge-trimmer.html