When you buy a 4g vehicle gps tracker, the first and most important thing is to activate the device. Here for the first time to use or plan to start a new locator of the 4g vehicle gps tracker activation method.
First, determine whether the product is wired or installation-free
First of all, the car knows whether it is buying a wiring model or a positioner without installation. The wired positioner needs to be connected to the vehicle's power supply to work properly. The non-installation type is usually fully charged and can be used, and the use time depends on the size of the battery. This is generally at the beginning of the purchase customer service will inform.
Second, the activation method
There is basically no difference in the activation of these two positioners, the only difference is that the positioner is embedded in the card without installation, and you do not need to buy an additional card to install it. The specific activation method is:
1. Install the SIM card on the locator; (It is best to buy a matching iot card sold by a regular business);
2, connect the power cord (no installation is to be fully charged), to ensure that the positioner can be turned on normally;
3, the car equipped with the locator is driven out of the normal driving for a period of time, the device will activate into the working state.
Third, operation precautions
In addition, it needs to be reminded that the power-on operation of the locator should pay attention to:
If it is a wired positioner installed, you need to find the positive and negative poles of the car power supply, and the positive pole can be found in these places: in the safety box, near the car key switch, or it can be directly connected to the battery. The negative pole is relatively easy to find, the body of the iron is the place.
It should also be noted that it is best to receive normal power, the side of the locator with the light should face the sky, and the side facing the sky should not be close to the metal object blocking the internal GPS antenna, so as not to prevent it from receiving signals.
The above operation is best for the owner to understand a little circuit knowledge, otherwise it is recommended to directly find the manufacturer's technical personnel to install. Sward supports the vehicle to drive to the manufacturer's location, and the staff helps install it for free.
It is much simpler to install without installation, as long as the charging line of the locator is connected, you can charge it, and after being fully charged, observe the charging indicator light of the locator. It's either changing color or it's not blinking.
4g vehicle gps tracker https://www.eelinktracker.com/4G-GPS-Tracker/